How to Build your Supershelf™ Central Hanging Garment Bays

Central Hanging Bays

TOOLS REQUIRED:
• Soft-faced hammer
• Safety steps (if the bay height exceeds 2 metres)
• We also recommend wearing gloves

Contents of Kit

A: 2 x End Frames B: Shelf Panels *Qty of shelf panels may vary dependant on width of bays C: 4 x Top Caps D & E: Hanging Beams and standard beams (the number of both hanging beams and standard beams depends on the height and type of garment hanging bay - see table below) Bay Height Single Sided Double Sided Central Hanging 2000mm 2 H Beams 7 Std Beams 4 H Beams 4 Std Beams 2 H Beams 6 Std Beams 2500mm 2/3 H Beams 8 Std Beams 4/6 H Beams 4 Std Beams 2/3 H Beams 8 Std Beams 3000mm 3 H Beams 9 Std Beams 6 H Beams 4 Std Beams 3 H Beams 8 Std Beams 3400mm 4 H Beams 10 Std Beams 8 H Beams 4 Std Beams 4 H Beams 10 Std Beams *H Beams - Hanging Beams, Std Beams - Standard Beams

	Stand up first end frame.			Connect the two standard beams to the bottom of this first end frame (see the beam clip notes below for more detail). Note that the top side of the beam has a long groove
	Stand up second end frame and connect the other ends of the two standard beams to it.			Connect 2 standard beams to the top of the unit at the front and back (see the beam clip notes below for more detail).

	Connect 1 hanging beam to the horizontal brace just under the top shelf level. Go to step 6a, 6b, 6c or 6d depending on the height of your bay
	2000mm high Connect 1 more hanging beam to the horizontal brace positioned midway between the top shelf level and the bottom shelf level. Connect 2 standard beams to the front and back of the bay at the same level as the hanging beams. 2500mm high Depending whether the unit is to be fitted with 2 or 3 hanging levels, connect either 1 or 2 more hanging beams to the horizontal braces positioned between the top shelf level and the bottom shelf level. Connect either 2 or 4 standard beams to the front and back of the bay at the same level as the hanging beams. 3000mm high Connect 2 more hanging beams to the horizontal braces positioned between the top shelf level and the bottom shelf level. Connect 4 standard beams to the front and back of the bay at the same level as the hanging beams. 3400mm high Connect 3 more hanging beams to the horizontal braces positioned between the top shelf level and the bottom shelf level. Connect 6 standard beams to the front and back of the bay at the same level as the hanging beams.

	Fit one of the panels onto the top beam level.			Fit one of the panels on to the bottom beam level.
	Fit top caps. Remember these units always require fixing to the wall or the floor (preferably both) with the correct fixings.

Beam Clip
2 Clips to be fitted to each beam - 1 at each end    

Insert clip	tap clip into position	bend clip over top of beam

REMEMBER
  These units always require fixing to the wall or the floor (preferably to both) with the correct fixings.    

Wall fixing	Floor fixing	Hanging Beam

Click here to download a PDF version